Led Flame Proof Light Explosion Proof Spray Booth Lights Ex D IIC T5 T6
It is widely used in dangerous environment such as gas station, petroleum exploitation, oil refining, chemical industry, military industry, offshore oil platforms, oil tankers and other places for general lighting and operation lighting.
Explosion-proof high bay, with explosion-proof CCC, EU ATEX, TUV, ROHS, ISO CE certification.
Applicable places: Explosive gas environment Zone 1 Zone 2, explosive dust environment Zone 21 Zone 22, such as: chemical plant workshops, warehouses; food workshops, gas stations, refineries, power stations, marine terminals, etc..
Optional lens to adjust the light angle to adapt to different installation sites. Can be ceiling mounted or guardrail mounted.
Specification
| Explosion-proof certificate number: | CNEx21.0370 |
| Explosion-proof mark: | Ex d IICT6/T5 Gb/Ex tD A21 IP66 T80/95℃ |
| Operating Voltage: | AC100～277V,50Hz/60Hz |
| rated power: | ≤150W |
| With light source: | LED |
| Corrosion grade: | WF2 |
| Protection class: | IP66 |
| Inlet specifications: | G3/4 |
| Inlet cable outer diameter: | Φ9～Φ10mm |
Explosion protection
| Ex Mark | Ex d IIC T6 Gb Ex tD A21 IP66 T80℃ |
| For use in | Zone 1, 2 & Zone 21, 22 |
Electrical data
| Rated voltage | 100-305 VAC, 50-60Hz |
| Power factor | >0.98 |
| THD | <20% |
Luminous characteristics
| Power consumption [W] | 50-100W | 100-150W |
| Colour rendering [CRI] | 80 (±2) |
| Colour temperature [K] | 3000-6500 |
| Luminaire efficiency [Lm/W] | 130-145 |
| Beam angle | 120° (60°, 90° optical len is optional) |
Mechanical data
| Degree of protection | IP66 |
| Cable entry | G 3/4”； NPT3/4” |
| Weight [kg] | 7.25 | 8.6 |
| Terminal | ≤2.5 mm² |
| Mounting Styles | Ceiling; Wall Bracket; Pendant |
features
①Light source module
◆Adopt high-brightness LED light source, cooperate with high-efficiency constant current drive power supply, save electricity up to 60% compared with gas discharge lamp.
◆The LED components are all sealed, waterproof and dustproof, without internal cleaning and maintenance.
◆The thermal resistance of the circuit substrate is low, and the module circuit is specially designed, and the failure of each unit will not affect the normal operation of other components.
②Power module
◆High-efficiency constant current drive power supply with intelligent power regulator.
◆It has the function of luminous flux compensation to reduce light decay and ensure the light efficiency of LED light source.
◆With over-voltage protection, over-current protection and surge current protection functions.
③Cooling module
◆The shell of the explosion-proof lamp is formed by high-pressure casting of aluminum alloy, and the surface is sprayed with high-voltage electrostatic spraying after shot blasting.
◆The circuit substrate is closely attached to the aluminum alloy shell, which can instantly convert the point heat source into a surface heat source, and the heat dissipation area is doubled, which is conducive to rapid heat dissipation and improves heat dissipation efficiency.
◆The surface of the shell has air flow distribution grooves, which take away heat with the help of air flow.
High heat dissipation fin density greatly increases the heat dissipation area, fully guarantees the heat dissipation requirements of the LED, and has a longer service life
Main purpose and scope of application
GYD680 series LED explosion-proof lamps (hereinafter referred to as explosion-proof lamps) are strictly in accordance with national standards GB 3836. 1- 2010 "Electrical Equipment for Explosive Gas Atmospheres Part 1: General Requirements", GB 3836. Part 2: Flameproof type
"d"", GB 12476. 1-2013 "Electrical Equipment for Combustible Dust Environment Part 1: General Requirements", GB 12476. 5- 2013 "Electrical Equipment for Combustible Dust Environment Part 5: Enclosure Protection Type "t D”>Designed and manufactured products. Mainly used in the environment containing ⅡA, ⅡB, Ⅱ
Class C, sites in Zones 1 and 2 of explosive gas atmospheres of groups T1 to T6 and sites in Zones 21 and 22 of combustible dust environments. Used as lighting for indoor and outdoor operations, activities, etc.
Normal operating conditions and installation conditions
◆Atmospheric pressure 80～110kPa;
◆The ambient temperature is not higher than +55°C and not lower than -40°C;
◆The relative humidity of the surrounding air is not more than 95% (+25°C);
◆In areas containing ⅡA, ⅡB, ⅡC, T1~T6 groups of explosive gas atmospheres in areas 1 and 2, and in areas 21 and 22 of combustible dust environments;
◆In places without corrosive gases and vapors that can damage metals and insulation;
◆In a place without significant shaking and shock vibration;
◆A place without flooding;
◆In the process of use, "it is strictly forbidden to open the cover with electricity" and "it is strictly forbidden to open the cover in dangerous places".
Lighting efficiency show
Install
Product Catalogue
LED Smart Plant Light
Waterproof LED Grow Light
Full Spectrum Grow Lamp
Tower Flood Light
LED Flood Light
Grow Light Ballasts
Explosion Proof LED Flood Light
Ex Proof LED Flood Light
Hazardous Area Floodlights
LED Flood Light Hazardous Area
Explosion Proof LED Canopy Lighting
Flame Proof LED Flood Light
Flameproof LED Street Light
Class 1 Div 2 LED High Bay
Explosion Proof High Bay LED Light
Flameproof High Bay Light
LED Explosion Proof High Bay Light
Atex High Bay Lighting
Zone 1 LED High Bay
Explosion Proof Classification Zone 1
Explosion Proof Solar Street Light
Explosion Proof Lighting Zone 2
Hazardous Area Street Lighting
Flp LED Flood Light
Flameproof Lamp
24vdc Explosion Proof Light
Ex LED Flood Light
Explosion Proof Light Fixtures Paint Booth
Explosion Proof Flood Light Metal Halide
Explosion Proof Light For Confined Space
Marine Explosion Proof Light
Anti Explosion LED Light
Atex Approved LED Lighting
Blast Proof LED Lights
Ex LED Lighting
Ex Lighting Fixtures
Ex Proof Lamp
Explosion Proof Industrial LED Lighting
Explosion Proof Area Light
Hazardous Location Explosion Proof Light
Explosion Proof Equipment
Zone 1 Floodlight
Wall Mounted Explosion Proof Lights
Flood Light Explosion Proof
Atex Zone 2 LED Lighting
LED Atex Lighting
Atex Explosion Proof LED Light
630w Cmh Grow Light
1000w Ceramic Metal Halide
315w Cmh Bulb
630w Cmh Double Ended
Fishing Lights Electronic Balla
Fishing Lamp Ballast
FAQ
Q: What certificates do you have?
A: We have passed ATEX, IECEx, CCC, EU, TUV, ROHS, ISO CE
Q: Can I just buy 1 or 2 pcs of sample for testing before place the bulk orders?
A: Yes, samples orders are always welcome, we are confident on our lights quality and we believe that you will place bulk order to us once you test our samples.
Q: Can youaccept customized?
A: Yes. Please inform us and confirm the design firstly based on our sample.
Q: Is it OK to print my logo on it?
A: We provide OEM service to our customers, we can help to make the label and color box according to your requirements.
Q. How do you ship the goods and how long does it take to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.
Q: Do you offer guarantee for it?
A: In general,we offer 3-5 years warranty.
Q: What place are your products used in?
A: They are widely used in petroleum chemical, aerospace, coal electrical power, railway, metallurgy, shipbuilding, medicine, marine, wine-making, fire fighting, municipal, military and other industries.
Q: What can you buy from us?
A: Explosion Proof Flood Light,Explosion Proof High Bay Light,Explosion Proof Street Light,LED Flood Light,Led Grow Light,LED High Bay Light,Tower Flood Light,Grow Light Ballast,CMH Grow Light,Fishing Lights Electronic Ballast.
Q: How to proceed an order for led light?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Forthly We arrange the production.
Product Tags:
|
|
Led Flame Proof Light Explosion Proof Spray Booth Lights Ex D IIC T5 T6 Images
|
